Acer Altos G510 Altos G510 User's Guide - Page 64
To install a 5.25-inch storage device, described
View all Acer Altos G510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
54 3 Upgrading the system 6 Insert the drive carrier with the newly-installed floppy drive into the drive bay. 7 Connect the floppy drive and 4-pin power cables to the new drive. 8 Observe the post-installation instructions described on page 38. To install a 5.25-inch storage device Note: If you are installing a new drive in an empty drive bay, skip steps 2 to 4. 1 Observe the ESD precautions and pre-installation procedures described on page 37. 2 Disconnect the power and IDE cables from the old drive.
3 Upgrading the system
54
6
Insert the drive carrier with the newly-installed floppy drive into
the drive bay.
7
Connect the floppy drive and 4-pin power cables to the new drive.
8
Observe the post-installation instructions described on page 38.
To install a 5.25-inch storage device
Note:
If you are installing a new drive in an empty drive bay, skip
steps 2 to 4.
1
Observe the ESD precautions and pre-installation procedures
described on page 37.
2
Disconnect the power and IDE cables from the old drive.