Acer Altos G510 Altos G510 User's Guide - Page 72
Installing an expansion card - server bios
View all Acer Altos G510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
62 3 Upgrading the system Installing an expansion card This section explains how to install an expansion card. The onboard expansion slots support PCI (Peripheral Component Interconnect) cards. Note: The BIOS setup automatically detects and assigns resources to the new device (applicable only to Plug-and-Play expansion cards). To install an expansion card Note: The illustrations used in this section show the Altos G510 server chassis. 1 Observe the ESD precautions and pre-installation procedures described on page 37. 2 Locate an empty expansion slot on the mainboard. 3 Loosen the bracket screw on the rear panel.(1). 4 Pull out the card bracket (2). 5 Remove the expansion card from its protective packaging.
3 Upgrading the system
62
Installing an expansion card
This section explains how to install an expansion card.
The onboard
expansion slots support PCI (Peripheral Component Interconnect)
cards.
Note:
The BIOS setup automatically detects and assigns resources
to the new device (applicable only to Plug-and-Play expansion
cards).
To install an expansion card
Note:
The illustrations used in this section show the Altos G510
server chassis.
1
Observe the ESD precautions and pre-installation procedures
described on page 37.
2
Locate an empty expansion slot on the mainboard.
3
Loosen the bracket screw on the rear panel.
(1)
.
4
Pull out the card bracket
(2)
.
5
Remove the expansion card from its protective packaging.