Acer Aspire SA80 Aspire SA80 and Power S280 Service Guide - Page 49

Advanced BIOS Features The following screen shows the Advanced BIOS Features: Phoenix - AwardBIOS CMOS Setup Utilitye Advanced BIOS Features Silent Boot Configuration Table X CPU Feature X Hard Disk Boot Priority CPU L1 & L2 Cache Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Swap Floppy Drive Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option ATA 66/100 IDE Cable Ms Typematic Rate Setting x Typematic Rate (Chars/Se x Typematic Delay (Msec) Security Option APIC Mode OS Select For DRAM > 64 HDD S.M.A.R.T Capability Video BIOS Shadow [ Enabled ] [ Disabled ] [ Press Enter ] [ Press Enter ] [ Enabled ] [ Enabled ] [ Floppy] [ Hard Disk] [CDROM] [ Enabled ] [Disabled] [Enabled] [ On ] [ Fast ] [ Enabled] [ Disabled ] 6 250 [Setup] [ Enabled] [ Non-OS2] [Disabled] [Enabled] Item Help Menu Level X KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F5: Previous Values F7: Optimized Defaults F1: General Help The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Parameter Silent Boot Configuration Table CPU Feature Hard Disk Boot Priority CPU L1 & L2 Cache Quick Power On Self Test First /Second/Third Boot Device Boot Other Device Swap Floppy Drive Description Options Display Full Screen LOGO during POST Enabled Disabled Enable the Configuration Table function Enabled Disabled Select to display CPU Feature Press [Enter] Select Hard Disk Boot Device Priority Press [Enter] Uses internal level 1 (L1) and external level 2 (L2) cache memory to improve performance. Enabled Disabled This parameter speeds up POST by skipping some items that are normally checked. Enabled Disabled The items allow you to set the sequence of boot device where BIOS attempts to load the disk operating system. Floppy, LS120, Hard Disk, CD-ROM, ZIP100, USB-FDD, USB-ZIP, LAN, Disabled (Disable this sequence). The sequence following the order of Floppy, HDD and CD-ROM is recommended. This parameter allows you to specify the system Enabled boot up search sequence. Disabled Setting to Enabled will swap floppy drive a: and Enabled b:. Disabled Chapter 2 41