Acer Aspire SA80 Aspire SA80 and Power S280 Service Guide - Page 65

PnP/ PCI Configurations Reset Configuration Data Resources Controlled By X IRQ Resources Phoenix - AwardBIOS CMOS Setup Utilitye PnP/PCI Configurations [Disabled] Item Help Menu Level X [Auto (ESCD)] [Press Enter] PCI / VGA Palette Snoop [Disabled] KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F5: Previous Values F7: Optimized Defaults F1: General Help The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings. Parameter Reset Configuration Data Resources Controlled By IRQ Resources PCI/VGA Palette Snoop Description Options Selecting "Enabled" to reset Extended System Configuration Data (ESCD) only if you installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system can not boot. Otherwise, you should leave it unchanged. Disabled Enabled This BIOS can automatically configure all of the boot and Plug and Play compatible devices. You can also set it as Manual and go into each of the sub menu to choose specific resources. Auto (ESCD) Manual The items are adjustable only when "Resources Press Enter Controlled By" is set to Manual. By pressing "Enter" to access the sub menu. Disabled - Data read or written by the CPU is only directed to the PCI VGA device's palette registers. Enabled - Data read or written by the CPU is directed to both the PCI VGA device's palette registers and the ISA VGA device's palette registers, permitting the palette registers of both VGA devices to be identical. Disabled Enabled *If any ISA bus adapter in the system requires VGA Palette snooping, the setting must be set to "Enabled". Chapter 2 57