Acer Aspire SA80 Aspire SA80 and Power S280 Service Guide - Page 60

Onboard Super IO Device Phoenix - AwardBIOS CMOS Setup Utilitye Onboard Super IO Device Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select x UR2 Duplex Mode Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] Half [378/IRQ7] [ECP] [3] Item Help Menu Level X KLIJ: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F5: Previous Values F7: Optimized Defaults F1: General Help Onboard SuperIO Device Parameter Onboard FDC Controller Onboard Serial Port 1/2 UART Mode Select UR2 Duplex Mode Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA Description Option Enables or disables the onboard floppy disk Enabled drive controller. Disabled This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1 Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Auto This option is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel port. Disabled 378/IRQ7 278/IRQ5 3BC/IRQ7 Enables you to set the data transfer protocol for your parallel port. SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port) and ECP+EPP. SPP EPP ECP ECP+EPP Select a DMA channel for the parallel port 1 when using the ECP mode. This field is only 3 configurable if Parallel Port Mode is set to ECP. The available setting values are 3 and 1. 52 Chapter 2