Acer CG437K User Manual - Page 30

• Ultra-Low Latency is not supports resolutions below 800x600. • Ultra-Low Latency is not supports V-Frequency below 48Hz. • Ultra-Low Latency is not support video interlace mode. • Ultra-Low Latency is support only Wide Mode = "Full". 6. Aim point: Show an Aim point on the screen for shooting games Note: If hot key menu or main menu is trigger the "Aim point" temporarily closed. OSD Mode - Standard Picture Color Audio Gaming OSD System Language OSD Timeout Transparency OSD Position OSD Zoom OSD Lock English 10 Off Center Normal Off Move Enter X 1. Language: Set the OSD menu language. 2. OSD timeout: Adjust the delay before turning off the OSD menu. 3. Transparency: Select the transparency when using gaming mode. The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%. 4. OSD Position: The OSD position default is Center, and the display position can be changed to (Top Left, Top Right, Bottom Right, Bottom Left, and Center) OSD Position only support OSD Zoom is X2. 5. OSD Zoom: OSD Zoom default is "Normal", choose "X 2" to zoom OSD. 6. OSD Lock: To choose OSD lock On/Off Note: OSD Locked: • Set the OSD Lock to "On" by the OSD option and press "Enter" to execute the All Key lock function. • The "OSD Locked" message will be displayed in the middle of the screen. • LED lights will be changed from blue light to orange light. • Press any Key screen to prompt "OSD Locked" message. OSD Unlocked: • In normal display condition to press the "Navi Key" in the middle of more than 3 seconds to trigger "OSD Unlock" (Remote controller only has the (arrow and OK) Keys can be released). • The "OSD Unlock" message will be displayed in the middle of the screen. • LED lights will be restored to blue light. CG437K User Guide English 20