Acer CG437K User Manual - Page 34
Hot key Assigment, DDC/CI, HDMI Black level, Quick start mode, 4K-144Hz Mode
View all Acer CG437K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Picture Color Audio Gaming OSD System Mode - Standard LED Control LED Brightness Screen On Mode Standby Mode 100% Off Mode B Move Enter Back X 13. Hot key Assigment: Select the function of shortcut key 1 or shortcut keys2:(Modes, Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive,VRB Note: Hot Key 1 and Hot Key 2 can't repeat the same function. 14. DDC/CI: Allows the monitor settings to be set through the software on the PC Note: • DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. • Widget tools must settings the DDC/CI to "On" can to work properly. 15. HDMI Black level: Select to set HDMI black level. 16. Quick start mode: Select Off or On. Turn on to speed up boot speed. 17. 4K-144Hz Mode: Default is "Off" (Support DP Only). Off: Support 4K-120Hz (Support HDR and AdaptiveSync). On: Support 4K-144Hz (Not Support HDR and AdaptiveSync). Note: Want to support 4K-144Hz, Graphic Card must be able to support 4K-144Hz and both DP1 and DP2 must be connected at the same time to enable this feature. To support display 4K-144Hz: • Min requirement is AMD RX470 or above graphic card • To connect both DP1 + DP2 port, need to use in box DP cables or VESA certified DP cables. • Must to turn on the 4K-144Hz mode in system page of OSD. CG437K User Guide English 24