Acer R310-U-P3200 User Guide - Page 113
To Verify a RAID 1, To Rebuild RAID 1, To Mark/Unmark an Array as Bootable
UPC - 750519118634
View all Acer R310-U-P3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
103 To Verify a RAID 1 If a RAID 1 is created using Quick Init, this utility can be used to verify the array. 1 Select the RAID 1 Array from the List of Arrays. 2 Press + to begin RAID verification. 3 Press or to accept or decline automatic repairs by the utility. To Rebuild RAID 1 If a RAID 1 is created with Build and Clear and then stopped, the Rebuild function of the utility can be used to resume. 1 Select the RAID 1 Array from the List of Arrays. 2 Press + to begin the rebuid operation. To Mark/Unmark an Array as Bootable 1 Select an array from the List of Arrays. 2 Press + to toggle wether an array is bootable.
103
To Verify a RAID 1
If a RAID 1 is created using Quick Init, this utility can be used to verify
the array.
1
Select the RAID 1 Array from the List of Arrays.
2
Press <Ctrl> + <S> to begin RAID verification.
3
Press <Y> or <N> to accept or decline automatic repairs by the
utility.
To Rebuild RAID 1
If a RAID 1 is created with Build and Clear and then stopped, the
Rebuild function of the utility can be used to resume.
1
Select the RAID 1 Array from the List of Arrays.
2
Press <Ctrl> + <R> to begin the rebuid operation.
To Mark/Unmark an Array as Bootable
1
Select an array from the List of Arrays.
2
Press <Ctrl> + <B> to toggle wether an array is bootable.