Adaptec 1542B User Manual - Page 2
Preparation, Configuration
View all Adaptec 1542B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Section Two Preparation & Configuration 2.1 UNPACKING AND INSPECTION The carrier is responsible for damage incurred during shipment. In case of damage, have the carrier note the damage on both the delivery receipt and the freight bill, then notify your freight company representative so that the necessary insurance claims can be initiated. After opening the shipping container, use the packing slip to verify receipt of the individual items listed on the slip. Retain the shipping container and packing material for possible later reuse should return of the equipment to the factory be necessary. NOTE: The AHA-1540B11542B, like all electronic equipment is static sensitive. Please take the proper precautions when handling the board. Keep the board in its conductive wrapping until it is configured and ready to be installed in your system. 2.2 PREPARATION The following section details the preparation procedure for the Adaptec AHA-1540B/1542B AT-to-SCSI host adapter. The preparation of the board consists of checking the various on-board jumpers, inserting the board into a full-length AT compatible connector, and connecting a SCSI cable from the on-board connector to a SCSI target. The following diagram shows the approximate location of the various customer configurable items on the AHA-1540B/1542B. Listed after the diagram are the functions of each item. Since the AHA-1540B/1542B is sensitive to static shock, it is recommended that the board is placed on the anti-static bag in which it came for examination and jumper configuration. AHA-1540B/1542B 2-1 adaptec