Adaptec 2060100 User Guide - Page 106
Installing the Driver When Windows NT 4.0, Already Installed, Removing a Host Adapter
View all Adaptec 2060100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Adaptec Ultra320 SCSI Cards User's Guide To swap adapters: 1 Install the driver for the Ultra320 Family host adapter by following the steps in Installing the Driver When Windows NT 4.0 Already Installed on page 9-4. It is not essential to remove the device driver for the host adapter you are replacing. Windows NT 4.0 dynamically detects the absence or presence of host adapter hardware, and no problems should arise if you leave the existing device driver installed. You may remove the device driver later, after you have successfully restarted Windows NT 4.0. However, if you leave the driver installed, the system alerts you with an error message of the extra device driver every time you start your computer. See Removing a Host Adapter on page 9-6. 2 Once the new device driver is installed, shut down Windows NT 4.0 and replace the existing host adapter with the Ultra320 Family host adapter. 3 Restart your computer and Windows NT 4.0. It is possible that some drive letter assignments may change from the previous configuration. 9-8