Adaptec 2060100 User Guide - Page 190
Enter, Con View SCSI Controller, HostRAID, Disabled, Channel B, Install the software
View all Adaptec 2060100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Migrating from HostRAID to Adaptec Ultra320 SCSI 4 Select the array by scrolling to it and pressing Enter. This will display the members of that array. 5 Press the D key to delete the selected array. When prompted to confirm deletion of the array, select Yes. 6 At the Deleting Information window, select None and press Enter. 7 When prompted, select Yes to continue. 8 Repeat Steps 4 through 7 if there is another array. You will also need to delete any spares. 9 Once all the arrays and spares have been deleted, press Esc to go back to the SCSISelect menu. 10 Use the arrow keys to select Configure/View SCSI Controller and press Enter. 11 From the Configuration menu, select HostRAID and press Enter. 12 From the HostRAID Pop-up menu, select Disabled. 13 Press Esc, save change, then exit. If you are using a dual channel card, select Channel B and repeat the steps to disable HostRAID support. Completing the Adaptec Ultra320 SCSI Driver Installation After you have installed the Adaptec Ultra320 SCSI driver and disabled HostRAID support, you need to complete the installation so that the Windows operating system can detect the new driver hardware. To complete your Adaptec Ultra320 SCSI driver installation, follow these steps: 1 Restart Windows XP. Windows XP will automatically discover the new hardware and will prompt you for the Adaptec Ultra320 SCSI driver. 2 At the Welcome to the found new Hardware Wizard window, select Install the software automatically (recommended), then click Next. F-7