Adaptec 2060100 User Guide - Page 68
Creating RAID 1 Arrays
View all Adaptec 2060100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Adaptec Ultra320 SCSI Cards User's Guide 4 Assign a RAID name by entering up to 15 alphabetic or numeric characters, then press Enter. The following message appears: Do you want to make this array bootable? 5 Select Yes if you want to make the array bootable. The following message appears: Create Array? 6 Select Yes. The following message appears: Are you sure? 7 Select Yes and press Enter to create a RAID 0 array. After your array is created, you will automatically return to the Main menu. Creating RAID 1 Arrays There are two ways to create a RAID 1 array. You can create a new RAID 1 array or you can migrate from an existing single drive to a RAID 1 array. To create a RAID 1 array using either option: 1 From the Select RAID Type window, select RAID-1. Select the hard drives you want using the Spacebar to toggle, then press Enter. The RAID-1 Build Option window appears. 2 Select an option and press Enter. The options you can choose are: s Create new RAID-1-is the default option. s Copy from (11) to (12)-copy from a source drive to a target drive if the source is equal to or smaller than the target. s Copy from (12) to (11)-copy from a source drive to a target drive if the source is equal to or smaller than the target. Note: If a valid partition table or boot block is detected in the target drive, you will get a warning message that the information will be destroyed. 4-8