Adaptec 2060100 User Guide - Page 44
Starting SCSI
View all Adaptec 2060100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configuring the Adaptec SCSI Card with SCSISelect SCSISelect Options Available Settings Default Setting Display Messages during Enabled, Disabled Enabled BIOS Initialization [Auto-sync] Extended INT 13 Translation for DOS Drives > 1 GB Enabled, Disabled Enabled Post Display Mode [Auto-sync] Verbose, Silent, Diagnostic Verbose SCSI Controller INT 13 Support Enabled Enabled Disabled: Scan Bus Disabled: Not Scan Domain Validation Enabled, Disabled Enabled Support Removable Disks Under INT 13 as Fixed Disks 2 Disabled, Boot Only, All Disks Disabled BIOS Support for Bootable CD-ROM 2 Enabled, Disabled Enabled HostRAID Options: HostRAID Enabled, Disabled Disabled 1 Setting is valid only if Multiple LUN Support is enabled. 2 Settings are valid only if host adapter BIOS is enabled. Starting SCSISelect To start SCSISelect: 1 Turn on or restart your computer. During the startup process, pay careful attention to the messages that appear on your screen. 2 When the following message appears on your screen, press the Ctrl-A keys simultaneously (this message appears for only a few seconds): Press for SCSISelect (TM) Utility! 3 Select SCSI Channel A or B. 4 From the menu that appears, use the arrow keys to move the cursor to the option you want to select, then press Enter. 3-3