Adaptec 2221000 Quick Installation Guide - Page 5
as shown in the below., enclosure all the way back until it rests completely on the rails - to
 |
UPC - 760884149805
View all Adaptec 2221000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
3 Secure the rear rails you selected to the rear supports of the equipment rack, using the supplied screws, as shown in the Figure in Step 1 on page 3. 4 Secure the front rails to the rear rails, as shown below. 5 Tighten all the screws before continuing. 6 With assistance from a second person, lift the Storage Enclosure and slide the rear of the enclosure onto the rails. Slide the enclosure all the way back until it rests completely on the rails, as shown in the Figure below. You can choose to have someone continue to support the enclosure until it is secured in the rack, although this extra support is not required. 4
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
 |
 |
4
3
Secure the rear rails you selected to the rear supports of the
equipment rack, using the supplied screws, as shown in the
Figure in
Step 1 on page 3
.
4
Secure the front rails to the rear rails, as shown below.
5
Tighten all the screws before continuing.
6
With assistance from a second person, lift the Storage Enclosure
and slide the rear of the enclosure onto the rails. Slide the
enclosure all the way back until it rests completely on the rails,
as shown in the Figure below.
You can choose to have someone continue to support the
enclosure until it is secured in the rack, although this extra
support is not required.