Adaptec 51645 User Guide - Page 41
MaxIQ SSDs to a controller. For RAID arrays, Adaptec, Install your Adaptec
UPC - 760884155622
View all Adaptec 51645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 5: Installing the Controller and Disk Drives ● 41 In a direct-attach connection, SSDs are connected directly to the controller with SAS cables (mini-SAS to SATA). In a backplane connection, use the appropriate cable for your backplane type (see page 39 for more about backplane connections). You can connect a maximum of four MaxIQ SSDs to a controller. For RAID arrays, Adaptec RAID controllers support a maximum of 256 drives, including SSDs (for details, see page 15). Note: The following steps use an Adaptec MaxIQ SSD as an example, but the procedure is suitable for any compatible SSD. 1 Install your Adaptec MaxIQ SSDs in your server. For servers with a standard 2.5-inch drive tray, install the SSD directly into the tray. If your server does not have a standard 2.5-inch drive tray, use a bracket or adapter which enables it to fit properly. Use a 2.5" to 3.5" adapter to install MaxIQ SSD if server does not have 2.5" tray. Typical MaxIQ SSD installation.