Adaptec 5325302036 Quick Installation Guide - Page 7
Installing Additional Disk Drives, Before You Begin, Recommended Disk Drive Configurations
![]() |
UPC - 753253020362
View all Adaptec 5325302036 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing Additional Disk Drives If the SANbloc S50 enclosure came with 4 drives installed, you can install up to 8 additional disk drives. The enclosure supports up to 12 SAS or 12 SATA disk drives, or a combination of both (up to 12 drives total). Caution Acclimate new disk drives to room temperature before you install them. Before You Begin While you can combine SAS and SATA drives in the same enclosure; you cannot combine SAS and SATA drives in the same column of drives. If you are combining SAS and SATA disk drives, use the figures below to plan where you will be placing the disk drives. These figures represent enclosures fully-loaded with disk drives. However, the same guidelines apply even if you are filling some of the drive slots with blank drive carriers. Recommended Disk Drive Configurations SAS Disk Drives SATA Disk Drives 5 SANBloc S50 Quick Install Guide
![](/manual_guide/products/adaptec-5325302036-quick-installation-guide-02fb2dd/7.png)