Adaptec 5325302036 Quick Installation Guide - Page 9
Connecting to Your Snap Server, Connecting One SANbloc S50 Enclosure
UPC - 753253020362
View all Adaptec 5325302036 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4 Gently push the lever until it meets the latch on the left side of the drive slot and clicks into place. 5 Repeat for all remaining disk drives. Note To maintain proper airflow and cooling, a disk drive or a blank drive carrier must be installed in every slot of the enclosure. Connecting to Your Snap Server Follow the instructions appropriate for your configuration. Connecting One SANbloc S50 Enclosure 1 Power off your Snap Server. 2 Use the included 4x SAS cable to connect your Snap Server to the HOST port on the SANbloc S50 enclosure. Snap Server SANbloc S50 Enclosure SAS Port HOST EXP FAULT ! SEP MASTER HOST Port 7 SANBloc S50 Quick Install Guide
7
SANBloc S50 Quick Install Guide
4
Gently push the lever until it meets the latch on the left side of the
drive slot and clicks into place.
5
Repeat for all remaining disk drives.
Note
To maintain proper airflow and cooling, a disk drive or a blank
drive carrier must be installed in every slot of the enclosure.
Connecting to Your Snap Server
Follow the instructions appropriate for your configuration.
Connecting One SANbloc S50 Enclosure
1
Power off your Snap Server.
2
Use the included 4x SAS cable to connect your
Snap Server
to the HOST
port on the
SANbloc S50 enclosure
.
HOST
EXP
FAULT !
SEP MASTER
SANbloc S50
Enclosure
Snap Server
SAS Port
HOST Port