Adaptec 5325302040 Quick Installation Guide - Page 16

FCC Notification Authorized Service Only an authorized service representative can service the Server. Failure to comply with this requirement will void the warranty. WARNING to Service Personnel The SANbloc S50 has been tested and found to comply with the limits for a Class "A" digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. Changes or modifications not expressly approved by Adaptec could void the user's authority to operate the equipment. Safety Precautions Note The maximum current draw is printed on the label on the back of the storage subsystem. Caution Before touching any enclosure components, ground yourself and take antistatic precautions. Adaptec recommends that you use an antistatic wrist strap and a grounding wire as minimum precautions. Environmental Conditions - Make sure the conditions of the environment in which the server resides fall within the specifications for your model. Installing the Server - During installation, make sure the server is always placed on a surface capable of supporting its weight. SANbloc S50 SAS JBOD Quick Install Guide