Adaptec 5325302040 Quick Installation Guide - Page 3

SANbloc S50 SAS JBOD Quick Install Guide This Quick Installation Guide describes how to install and connect the Adaptec SANbloc S50 SAS JBOD enclosure. This enclosure supports up to 12 Serial Attached SCSI (SAS) or 12 Serial ATA (SATA) disk drives. For more information, including supported enclosure configurations, refer to the Adaptec SANbloc S50 SAS JBOD Enclosure User's Guide on the CD. Kit Contents • SANbloc S50 SAS JBOD enclosure • Two power cables • Rackmount kit • CD, including software and product documents Installation Checklist 1 Plan the installation (see "Preparing for Installation" on page 2). 2 Optional-Install the enclosure in an equipment rack (see "Installing Your Enclosure into a Rack" on page 2). 3 Install the disk drives (see "Installing the Disk Drives" on page 5). 4 Connect the enclosure (see "Connecting the Enclosure" on page 8). 5 Power on (see "Powering On" on page 10). 6 Register your enclosure (see "Registering Your SANbloc S50 Enclosure" on page 11). 1 SANbloc S50 SAS JBOD Quick Install Guide