Adaptec AAA-133U2 Hardware Guide - Page 52
Installing the Array1000U2 Driver for Novell, NetWare
UPC - 760884134337
View all Adaptec AAA-133U2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
AAA-130U2 Series Installation and Hardware Guide Installing the Array1000U2 Driver for Novell NetWare To begin driver installation, see either Installing the Driver When Installing NetWare on page 5-2, or Installing the Driver When NetWare is Already Installed on page 5-7. Note: We recommend that you install your Novell NetWare operating system on a fault-tolerant array (RAID 5, 1, or 0/1) to take advantage of the redundancy and performance features of the array. Installing the Driver When Installing NetWare To install the cda1000h.ham driver when you are installing NetWare, follow the instructions below for the version of NetWare you are installing. Note: The instructions below assume your CD-ROM is connected to the AAA-131U2/133U2. If your CD-ROM is not connected to the AAA-131U2/133U2 (for example, connected to an IDE controller), you will need to include command lines in the config.sys and autoexec.bat files similar to those described below. Refer to the documentation for the adapter the CD-ROM is connected for the appropriate command lines. NetWare 4.11 and 4.2 Follow these instructions only if you are installing NetWare 4.11 or 4.2 for the first time: 1 Create a DOS partition and install DOS on your system. 2 Copy the aspi8u2.sys and aspicd.sys files from the \dos direc- tory on the Adaptec Array1000U2 Family Manager Set driver disk to a directory (e.g., c:\scsi) on your hard disk. 5-2 Downloaded from www.Manualslib.com manuals search engine