Adaptec AAA-133U2 Hardware Guide - Page 55

tory on the Adaptec Array1000U2 Family Manager Set driver

Get Adaptec AAA-133U2 - AAA 133 RAID Controller PDF manuals and user guides
UPC - 760884134337
View all Adaptec AAA-133U2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Installing the Software Driver for Novell NetWare Note: Older versions of the aic78xx.dsk driver (before v1.30) are compatible with cda1000h.ham as long as the AAA-131U2/133U2 PCI slot is not specified on the command line (e.g., load aic7870.dsk slot=z). If there is an AIC-78xx based card (e.g., AHA™-2940) in the system, z must point to that card's slot number and not to the AAA-131U2/133U2 slot number. If loaded without command line parameters, NetWare lists valid slot numbers. The AAA-131U2/133U2 will be listed in the parameter list; however, do not select it. NetWare 5.0 Follow these instructions only if you are installing NetWare 5.0 for the first time: 1 Create a DOS partition and install DOS on your. 2 Copy the aspi8u2.sys and aspicd.sys files from the \dos direc- tory on the Adaptec Array1000U2 Family Manager Set driver disk to a directory (e.g., c:\scsi) on your hard disk. 3 When using a SCSI CD-ROM, edit the config.sys file to include command lines for aspi8u2.sys and aspicd.sys. The following sample command lines for the config.sys file are appropriate for most systems: device=c:\scsi\aspi8u2.sys /d device=c:\scsi\aspicd.sys /d:aspicd0 Note: For non-Ultra2 systems, use aspi8dos.sys instead of aspi8u2.sys in the command line (for example, device=c:\scsi\aspi8dos.sys /d). 5-5 Downloaded from www.Manualslib.com manuals search engine

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
5-5
Installing the Software Driver for Novell NetWare
Note:
Older versions of the
aic78xx.dsk
driver (before v1.30)
are compatible with
cda1000h.ham
as long as the
AAA-131U2/133U2 PCI slot is not specified on the com-
mand line (e.g.,
load aic7870.dsk slot=z
). If there is an
AIC-78xx based card (e.g., AHA
™
-2940) in the system,
z
must point to that card’s slot number and not to the
AAA-131U2/133U2 slot number. If loaded without com-
mand line parameters, NetWare lists valid slot numbers.
The AAA-131U2/133U2 will be listed in the parameter list;
however,
do not
select it.
NetWare 5.0
Follow these instructions only if you are installing NetWare 5.0 for
the first time:
1
Create a DOS partition and install DOS on your.
2
Copy the
aspi8u2.sys
and
aspicd.sys
files from the
\dos
direc-
tory on the Adaptec Array1000U2 Family Manager Set driver
disk to a directory (e.g.,
c:\scsi
) on your hard disk.
3
When using a SCSI CD-ROM, edit the
config.sys
file to include
command lines for
aspi8u2.sys
and
aspicd.sys
. The following
sample command lines for the
config.sys
file are appropriate for
most systems:
device=c:\scsi\aspi8u2.sys /d
device=c:\scsi\aspicd.sys /d:aspicd0
Note:
For non-Ultra2 systems, use
aspi8dos.sys
instead of
aspi8u2.sys
in the command line (for exam-
ple,
device=c:\scsi\aspi8dos.sys /d).
Downloaded from
www.Manualslib.com
manuals search engine