Airlink AML001 Manual - Page 35
Retrain by Local Modem, Remote Server ID
![]() |
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
PCI Modem Card User's Manual Receive Frame Count Number of LAPM frames received by the client during this call. Count wraps around at 65535. Receive Frame Error Count Number of frames received in error by the client. Retrain by Local Modem Number of retrains or rate renegotiations requested by the modem. Retrain by Remote Modem Number of retrains or rate renegotiations requested by the remote modem. Call Termination Cause Reason for call ending. Only valid after call ends. Result codes are as follows: Robbed-Bit Signaling ! 0 = local modem command: ATH, DTR drop. ! 1 = remote modem: cleardown, loss of signal. ! 2 = no answer, busy, etc. ! 3 = training failure V.90 or V.34. ! 4 = protocol failure if required by \N4, for example. For PCM connection only, a hexadecimal 6-bit pattern of T1 frames with robbed-bit signaling. Digital Loss (dB) For PCM connection only, the downstream digital loss. Remote Server ID - L-Speaker Volume Use this command to set the monitor speaker volume setting when the speaker is on. L0 Low volume. L1 Low volume. L2 Medium volume (default). L3 High volume. M-Speaker Control Use this command to turn the monitor speaker on or off. M0 Speaker is off. 34
![](/manual_guide/products/airlink-aml001-manual-74b090b/35.png)