Airlink AML001 Manual - Page 50
Appendix A, Valid <max_history_tx> and <max_history_rx> Values
![]() |
View all Airlink AML001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Appendix A AT Commands Use this command to configure the V.44 data compression method used by the modem. The soft modem never disconnect if V.44 is not negotiated and always use the streaming method for data transfers. As a result, and are always 0. The parameter sets which directions use the compression method. The soft modem use compression in one or both directions. Valid Values: 0 Modem negotiates no V.44 compression. 1 Modem negotiates transmit only V.44 compression. 2 Modem negotiates receive only V.44 decompression. 3 Modem accepts compression in both or either direction (default). The parameter specifies the maximum number of code words to negotiate in the transmit direction. The parameter specifies the maximum number of code words to negotiate in the receive direction. Valid and Values: 2048 512, 1024, 2048 Default and value. Valid transmit and receive code word settings. The parameter specifies the maximum string length to negotiate in the transmit direction. The parameter specifies the maximum string length to negotiate in the receive direction. Valid and Values: 255 Default and value. 32-255 Valid transmit and receive string lengths. The parameter specifies the maximum length of the history buffer to negotiate in the transmit direction. The parameter specifies the maximum length of the history buffer to negotiate in the receive direction. Valid and Values: 6144 Default and value. 1024, 2048, 4096, 1536, 3072, 6144 Valid maximum transmit and receive history buffer sizes. 49
![](/manual_guide/products/airlink-aml001-manual-74b090b/50.png)