Alesis Recital 61 Recital 61 User Guide v1.1 - Page 11
Effects
View all Alesis Recital 61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Effects With the Recital 61, you can add adjustable Reverb and/or Chorus effects to your sound. To enable the effects: 1. Press the Reverb/Chorus button once to turn on the reverb effect. The button LED will be lit green when only the Reverb effect is enabled. 2. Press the Reverb/Chorus button again to turn off the reverb effect and turn on the chorus effect. The button LED will be lit red when only the Chorus effect is enabled. 3. Press the Reverb/Chorus button again to turn on both the reverb and chorus effects. The button LED will be lit amber when both effects are enabled. 4. Press the button again to turn off all effects. The LED will be off when no effects are enabled. To adjust the reverb type: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, use the keys marked Reverb 1-5 to select the desired reverb type. Setting 1 2 3 4 5 Reverb Type Room Hall Church Delay Pan Delay 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode. To adjust the chorus type: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, use the keys marked Chorus 1-5 to select the desired chorus type. Setting 1 2 3 4 5 Chorus Type Chorus 1 Chorus 2 Chorus 3 Flanger Rotary 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode. 11