Alesis Recital 61 Recital 61 User Guide v1.1 - Page 8

Voice Volume You can set the volume of each voice in Layer Mode and the split voice in Split Mode. To set the volume of the upper voice in Layer Mode: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, use the keys marked Upper Volume 1-2-3 to set the volume. 1 is the lowest volume, and 3 is the highest volume. 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode. To set the volume of the lower voice in Layer Mode or the split voice in Split Mode: Follow the steps above but instead use the Lower Volume 1-2-3 or Split Volume 1-2-3 keys. Setting the MIDI Channel You can also set the MIDI channel for the USB-MIDI output. To set the MIDI Out channel: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, use the keys marked Midi Ch. - or Midi Ch. + to set the MIDI Out channel from 1-16. Press both keys at the same time to restore the default channel setting to 1. Note: Recital 61 uses only one MIDI channel at a time, even if you are using Split Mode or Layer Mode. 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode. Setting the Click Tone When the click tone is on, you will hear a click sound whenever you change a setting. To turn the click tone on or off: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, press the key marked Click to turn the tone on or off. 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode. 8