Alpine CDA 9885 Owners Manual - Page 35

• The user has selected a channel number that does not exist or is not subscribed to. - The unit will revert back to the previously selected channel. • There is no artist name/feature, song/program title, or additional information associated with the channel at that time. - No action needed. • If an error or other problem occurs. - Change channels or consult your Alpine dealer. Indication for iPod Mode • The iPod is not connected. - Make sure the iPod is correctly connected (refer to "Connections"). Make sure the cable is not bent excessively. • The iPod's battery remains low. - Refer to the iPod's documentation and charge the battery. • There are no songs in the iPod. - Download songs to the iPod and connect to this unit. • There is no podcast data in the iPod. - Download podcast data to the iPod and connect to this unit. • Communication error - Turn the ignition key off, and then set to ON again. - Check the display by reconnecting between the iPod and the adapter, using the iPod cable. • Caused by the iPod Software Version not being compatible with this unit. - Update the iPod Software Version to be compatible with this unit. Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7-107.9 MHz 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530-1,710 kHz 22.5 µV/27 dB CD PLAYER SECTION Frequency Response Wow & Flutter (% WRMS) Total Harmonic Distortion Dynamic Range Signal-to-Noise Ratio Channel Separation 5-20,000 Hz (±1 dB) Below measurable limits 0.008% (at 1 kHz) 95 dB (at 1 kHz) 105 dB 85 dB (at 1 kHz) PICKUP Wave length Laser power 795 nm CLASS I REMOTE CONTROL Battery Type Width Height Depth Weight AAA batteries (2 pcs.) 42 mm (1-21/32") 121 mm (4-25/32") 23 mm (29/32") 50 g (1.8 oz) GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* *Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 4 V/10 k ohms Bass +14/-14 dB at 100 Hz Treble ±14 dB at 10 kHz Weight 1.6 kg (3 lbs. 8 oz) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 162 mm (6-3/8") NOSEPIECE SIZE Width Height Depth 170 mm (6-3/4") 46 mm (1-13/16") 24 mm (15/16") • Due to continuous product improvement, specifications and design are subject to change without notice. 33-EN