Alpine CDE-SXM145BT User Manual - Page 11

Radio SOURCE/ Rotary encoder TUNE/A.ME /ENTER   BAND Preset buttons (1 through 6) * The illustration is for CDE-SXM145BT/CDE-143BT. • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. Presetting Stations Automatically 1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNEA.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1. Note • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Listening to Radio 1 Press SOURCE to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed. F1 (FM1)  F2 (FM2)  AM  F1 (FM1) 3 Press TUNEA.ME to select the tuning mode. SEEK DX (Distance mode)  SEEK LOCAL (Local mode)  MANUAL (Manual mode)  SEEK DX Note • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press  or  to tune in the desired station. In Manual mode, holding down  or  will change the frequency continuously. Presetting Stations Manually 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized. Notes • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). Tuning to Preset Stations 1 Press BAND repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. Frequency Search Function You can search for a radio station by its frequency. 1 Press ENTER in Radio mode to activate Frequency search mode. The "" indicator lights up. 2 Turn the Rotary encoder to select the desired frequency. 3 Press ENTER to receive the selected frequency. Note • Press r in the search mode to cancel. Or, the search mode will be canceled if no operation is performed for 60 seconds. 11-EN