Alpine CDE-SXM145BT User Manual - Page 20

*10 FW VERSION can be selected in this mode. You can see the current firmware version about BLUETOOTH by using this setting. *11 AUX NAME can be selected in this mode. For details, refer to "Setting the AUX NAME mode" on page 21. *12 CALL SOUND, CALLER ID, PB UPDATE, PB ORDER, AUTO ANS, SPEAKER SL and FW VERSION can be selected in this mode. For details about these settings, refer to "BLUETOOTH SETUP" on page 23. *13 The Hands free phone talk level, ring tone level and microphone gain level can be adjusted by using this setting. Changing the settings in the Option mode will also affect the same settings in the SETUP menu. Refer to "Adjusting the volume (VOL LV ADJ)" on page 24. *14 Refer to "Setting the BLUETOOTH sound quality" on page 24. *15 While calling, the call sound can be switched between the unit and mobile phone by using this setting. This operation can also be done by pressing BAND. Refer to "Call Switching Operation" on page 27. *16 While calling, and the Voice Mute is activated, the microphone input will mute instantly and "VOICE MUTE" will blink. This operation can also be done by pressing . Refer to "Muting the microphone input quickly (Voice Mute)" on page 27. *17 If there is a waiting call, select this item to display the caller's Name and waiting number (1 or 2). Press k and the display will switch. *18 Select this item to hang up the call. Notes • Press r to return to the previous mode. • Pressing and holding r for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. SETUP SOURCE/ Rotary encoder /ENTER AUDIO/SETUP * The illustration is for CDE-SXM145BT/CDE-143BT. Setting You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can be modified. Use steps 1 to 5 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item. 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the desired item, and then press ENTER. (e.g. Select GENERAL) AUDIO*1  GENERAL  DISPLAY  TUNER  SIRIUSXM*2  iPod  BLUETOOTH*3 GENERAL: CLOCK ADJ*4  AUX SETUP*5  AUX NAME*6  PLAY MODE*7  DEMO DISPLAY: DIMMER  TEXTSCROLL  SCROLLTYPE TUNER: FM SET iPod: iPod LIST *1 Refer to "Audio Setup" on page 15. *2 Displayed only when a SiriusXM Tuner is connected. For details, refer to "SiriusXM Setting (CDE-SXM145BT Only)" on page 32. (CDE-SXM145BT Only) *3 Refer to "BLUETOOTH SETUP" on page 23. *4 Refer to "Setting Time" on page 10. *5 Not displayed when the current source is AUXILIARY. *6 Displayed only when AUX SETUP is set to ON. *7 CDE-SXM145BT/CDE-143BT only. 3 Turn the Rotary encoder to select a setting item, and then press ENTER. (e.g. Select AUX SETUP) 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select AUX ON or AUX OFF.) 20-EN