Alpine CDE-SXM145BT User Manual - Page 12

CD/MP3/WMA (CDE-SXM145BT/ CDE-143BT only) SOURCE/ Rotary encoder / II /ENTER    5  4 Preset buttons (1 through 6) * The illustration is for CDE-SXM145BT/CDE-143BT. Playback 1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. • The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back. • During CD/MP3/WMA playback, press r, and then you can quickly return to the hierarchy level selected last time in the search mode. Repeat Play 1 Press z 4. The song is played back repeatedly. RPT ONE*1  RPT FOLDER*2  RPT OFF  RPT ONE *1 Only a track/file is repeatedly played back. *2 Only files in a folder are repeatedly played back. (MP3/WMA mode only) 2 To cancel repeat play, select RPT OFF with the above procedure. M.I.X. (Random Play) 1 Press 5 x. The songs are played back in random sequence. MIX FOLDER*1  MIX ALL*2/*3  MIX OFF  MIX FOLDER *1 Only files in a folder are played back in random sequence. (MP3/WMA mode) *2 The tracks/files in the disc are played back in random sequence. *3 In the USB mode, all files stored in the Flash Memory are played back in random sequence. 2 To cancel M.I.X. play, select MIX OFF with the above procedure. Note • When a disc is already inserted, press SOURCE to switch to the DISC mode. 2 While playing back MP3/WMA, press  or  to select the desired folder. Pressing and holding  or  will change folders continuously. 3 Press  or  to select the desired track (file). Pressing and holding  or  will fast backward/fast forward track continuously. 4 To pause playback, press . Pressing  again will resume playback. 5 To eject the disc, press . Notes • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • The "" indicator lights up when a disc is inserted. • Three-inch (8 cm) CDs cannot be used. • Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit. • The track display for MP3/WMA data playback is the file numbers recorded on the disc. Searching for CD Text On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song. 1 Press ENTER during play. This will set the search mode, and the "" indicator lights up. 2 Turn the Rotary encoder to select the desired track, and then press ENTER. This will play the selected track. Notes • Press r in the search mode to cancel. Or, the search mode is canceled if no operation is performed for 60 seconds. • When CD Text Search is made during M.I.X. play, the M.I.X. play mode will be canceled. • If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to "Direct Search Function" on page 31. 12-EN