Alpine CDE-SXM145BT User Manual - Page 24

Notes • If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the  indicator lights up, then the display returns to the SETUP screen. • If a mobile phone is connected to this unit successfully, the c indicator lights up to show the battery quantity of the connected mobile phone. The j indicator lights up when the battery quantity is in mid level, and it blinks in low level. • Indicator i (Signal Strength) (CDE-143BT/UTE-42BT only): The indicator will display the current signal strength of mobile phone. The indicator blinks when the signal of the connected mobile phone is weak. • Depending on the connected mobile phone, the c (battery quantity) and i (signal strength) (CDE-143BT/UTE-42BT only) indicators may not be displayed. • If all the 5 positions have been registered, you cannot register the 6th device. To register another device, you need to delete one of the devices from position 1 to 5 first. Setting the Visible Mode You can set whether this unit can be recognised or not from a BLUETOOTH compatible device. Normally set this to VISI M ON.  Setting item: VISIBLE M Setting contents: VISI M OFF / VISI M ON (Initial setting) VISI M OFF: Disable recognition of this unit from the BLUETOOTH compatible device. VISI M ON: Enable recognition of this unit from the BLUETOOTH compatible device. Setting the BLUETOOTH sound quality You can flexibly customize the sound of a call to fit your own preferences.  Setting item: CALL SOUND  Further setting items: VOL LV ADJ / TYPE SET Adjusting the volume (VOL LV ADJ) You can emphasise or weaken the volume level of the Phone call, the ring tone and the microphone input to fit your own preferences. Setting contents: PHONE TALK: -5 dB ~ +5 dB RING TONE: -5 dB ~ +5 dB MIC GAIN: -5 dB ~ +5 dB Sound Auto setting (TYPE SET) This unit provides 5 methods to improve the sound quality of calling. You can choose the type according to your own preference. Setting contents: TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5 TYPE1: Standard Mode (recommended) TYPE2: Enhances the noise reduction TYPE3: Enhances the echo-cancel TYPE4: Enhances both noise reduction and echo-cancel 24-EN TYPE5: Weakens both noise reduction and echo-cancel Notes • The functions below are designed to improve the sound quality of the caller to driver. Noise reduction: This function can reduce the road noise, but excessive enhancement may affect the sound quality of calling. Echo-cancel: This function can reduce echo, but excessive enhancement may affect the sound quality of calling. • Improvement effect differs depending on the actual calling environment, so please choose a suitable type accordingly. Setting the caller information display ON/ OFF If you want to keep the ID information of the caller from others, set this item to OFF. Telephone number will be displayed while you are dialing; "NO NAME" will be displayed during a call.  Setting item: CALLER ID Setting contents: OFF / ON (Initial setting) Setting the Phone Book Update You can update the phone book automatically or manually.  Setting item: PB UPDATE  Further Setting contents: AUTO/MANUAL Setting the Phone Book Auto Update ON/OFF (AUTO) When you select AUTO ON in this step, whenever the vehicle's ignition is turned ON or after the phone is re-paired with this unit, the phone book will be updated automatically. Setting contents: AUTO OFF / AUTO ON (Initial setting) Note • "UPDATING" will be displayed during the phone book update. Setting the Phone Book Manual Update ON/OFF (MANUAL) When you select UPDATE YES in this step, the phone book will be updated immediately regardless if the Auto update function is on or off. Setting contents: UPDATE NO (Initial setting) / UPDATE YES Note • "UPDATING" will be displayed during the phone book update. Changing the Phone book List Order The phone book is listed alphabetically according to the initial letter of name. You can choose to arrange the phone book list order according to the initial letters of the FIRST NAME or LAST NAME.  Setting item: PB ORDER Setting contents: FIRST NAME (Initial setting) / LAST NAME