Alpine CDE9842 Owners Manual - Page 6

Getting Started

Get Alpine CDE9842 PDF manuals and user guides View all Alpine CDE9842 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Getting Started CDE-9846 Rotary encoder SOURCE/POWER Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit. 2 1 MUTE/SETUP CDE-9842 4 SOURCE/POWER 3 MUTE/SETUP Turning Power On and Off Press SOURCE/POWER to turn on the unit. • The unit can be turned on by pressing any other button except eject c and TITLE/ . Press and hold SOURCE/POWER for at least 2 seconds to turn off the unit. • The first time power is turned on, the volume will start from level 12. Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press (Release) at the lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out. • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. Initial System Start-Up Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Remove the detachable front panel. 3 Press RESET with a ballpoint pen or similar pointed object. 1 RESET switch Adjusting Volume Turn the Rotary encoder (CDE-9846 only) or press 4 and 3 (CDE-9842 only) until the desired sound is obtained. Lowering Volume Quickly Activating the Audio Mute function will instantly lower the volume level by 20 dB. Press MUTE/SETUP to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing MUTE/SETUP again will bring the audio back to its previous level. • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. 5-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
5
-EN
Getting Started
CDE-9846
CDE-9842
Turning Power On and Off
Press
SOURCE/POWER
to turn on the unit.
•
The unit can be turned on by pressing any other button except eject
c
and TITLE/
.
Press and hold
SOURCE/POWER
for at least 2
seconds to turn off the unit.
•
The first time power is turned on, the volume will start from level 12.
Detaching and Attaching the Front Panel
Detaching
1
Turn off the unit power.
2
Press
(Release) at the lower left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
To protect the front panel, place it in the supplied carrying case.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
2
1
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
•
Attach the front panel carefully, holding the sides of the front panel
to avoid pushing buttons by mistake.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Remove the detachable front panel.
3
Press
RESET
with a ballpoint pen or similar
pointed object.
1
Adjusting Volume
Turn the
Rotary encoder
(CDE-9846 only) or press
4
and
3
(CDE-9842 only) until the desired sound is
obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
MUTE/SETUP
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
MUTE/SETUP
again will bring the audio
back to its previous level.
SOURCE/POWER
Rotary encoder
SOURCE/POWER
3
RESET switch
MUTE/SETUP
MUTE/SETUP
4