Alpine CDE9842 Owners Manual - Page 9

CD/MP3 CDE-9846 Rotary encoder -/J SOURCE/ POWER TITLE/ c g f 8 2 1 9 3 CDE-9842 SOURCE/POWER 45 6 c -/J g f 45 6 TITLE/ Playback The following table shows which discs can be played on which models. CDE-9846 CDE-9842 CD CD-TEXT MP3 \ \ \ \ 1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically. 3 Press g or f to select the desired track (file). Returning to the beginning of the current track (file): Press g. Fast backward: Press and hold g. Advancing to the beginning of the next track (file): Press f. Fast forward: Press and hold f. 4 To pause playback, press -/J. Pressing -/J again will resume playback. 5 To eject the disc, press c. • Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either. • If the CD does not eject, press and hold c for at least 2 seconds. CDE-9846 (compatible with MP3): • The CD-player can play discs containing audio data and MP3 data. • The track display for MP3 data playback is the file numbers recorded on the disc. MP3 Play Display The folder number and file number will be displayed as described below. CDE-9846: MP3 F01 T03 Folder number File number display display • If the folder number or file number are three digits, "F" or "T" is not displayed. • Press TITLE/ to switch the display. Please see "Displaying the Title/Text" (page 14) for information about display switching. When a disc is already inserted, press SOURCE/POWER to switch to the CD mode. The mode will change every time the button is pressed. TUNER → CD → TUNER 2 CDE-9846: While playing back MP3, press 1 9 or 8 2 to select the desired folder. Pressing and holding 1 9 or 8 2 will change folders continuously. 8-EN