Alpine IDA-X303 Ida-x303 Owner's Manual (english) - Page 27

Storing Channel Presets 1 Press BAND to select the desired band you want to store. 2 Press PRESET. The Preset screen is displayed. 3 Turn the Double Action encoder to select the preset number. 4 Press and hold /ENTER for at least 2 seconds. The selected station is stored. 5 Repeat the procedure to store up to 5 other channels onto the same band. • To use this procedure for other bands, simply select the band desired and repeat the procedure. • A total of 18 channels can be stored in the preset memory for either XM or SIRIUS. 6 Channels are stored in each band (XM1, XM2 and XM3 for XM; SIRIUS1, SIRIUS2 and SIRIUS3 for SIRIUS). • If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one. Receiving Stored Channels 1 Press BAND to select the desired band. 2 Press PRESET. The Proeset screen is displayed. 3 Turn the Double Action encoder to select a radio station. 4 Press /ENTER. The selected station is received. Storing the desired Sports Team (SIRIUS only) Store a favorite team from one of the available leagues SIRIUS covers. Once stored, game times and scores for that team are announced using the interruption Alert display while receiving other programming. To receive these announcements, refer to page 25. This function becomes effective after performing the following two operations. Storing while receiving a game broadcast 1 Select the channel broadcasting your favorite team's game. 2 Press FUNCTION/SETUP to activate the Function mode. 3 Turn the Double Action encoder to select MEMORY, then press /ENTER to activate the Memory mode. 4 Turn the Double Action encoder to select the desired team for the game being broadcast, and then press /ENTER. 5 Turn the Double Action encoder to select alert type, and then press /ENTER. UPDATE (Initial setting) INITIAL UPDATE : The Alert display interrupts by game progress (change of score, game result, etc.). INITIAL : The Alert display interrupts when the game begins. 6 Press FUNCTION/SETUP to cancel the Function mode. • When you want to store but the memory area is full, "MEMORY FULL" is displayed. If you want to replace the team after you have performed the procedure in step 4, turn the Double Action encoder to select "REPLACE YES", and then press /ENTER . • If no operation is performed for 10 seconds , the unit returns to normal mode. Game Alert Setup 1 Press and hold FUNCTION/SETUP for at least 2 seconds to enter the Setup mode. 2 Turn the Double Action encoder to select a TUNER item, and then press /ENTER. 3 Turn the Double Action encoder to select GAME ALERT and then press /ENTER. 4 Turn the Double Action encoder to select the desired league, and then press /ENTER. 5 Turn the Double Action encoder to select a team you want to store, and then press /ENTER. 6 Turn the Double Action encoder to select an alert type, and then press /ENTER. UPDATE (Initial setting) INITIAL UPDATE : The Alert display interrupts by game progress (change of score, game result, etc.). INITIAL : The Alert display interrupts when the game begins. 7 Press and hold for at least 2 seconds to cancel the SETUP mode. • Pressing returns to the previous Setup mode. • You can store a maximum of one team per league. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. 25-EN