Alpine IDA-X303 Ida-x303 Owner's Manual (english) - Page 40

3 • The iPhone/iPod is not verified. - Change another iPhone/iPod. Indication for USB memory CURRENT ERROR • Abnormal current is being drawn by the device connected to USB. An error message may be displayed if the device connected is not compatible. The USB Flash Memory device may be defective. - Attempt to connect another USB memory. Indication for Portable audio player Mode CURRENT ERROR • Abnormal current is being drawn by the device connected to USB. An error message may be displayed if the device connected is not compatible. The USB Flash Memory device may be defective. - Attempt to connect another Portable audio player. DEVICE ERROR • A Portable audio player that is not supported by the unit is connected. - Attempt to connect another Portable audio player. DEVICE ERROR • A USB device that is not supported by the unit is connected. - Connect a USB device that is supported by the unit. NO USB DEVICE • A USB memory is not connected. - Make sure the USB memory device is correctly connected and the cable is not excessively bent. NO USB DEVICE • A Portable audio player is not connected. - Make sure the Portable audio player is correctly connected and the cable is not excessively bent. NO SONG • There are no songs in the Portable audio player. - Download songs to the Portable audio player and connect to this unit. • No song (file) is stored in the USB memory. - Connect the USB memory device after storing songs (files). UNSUPORT • A sampling rate/bit rate not supported by the unit is used. - Use a sampling rate/bit rate that is supported by the unit. • A copy-protected WMA file was played back. - You can only play back non-copy-protected files. NO SUPPORT • Text information that is not recognizable by the unit has been input. - Use a USB memory device with input text information that is supported by the unit. NO SUPPORT • Text information that is no supported on the unit has been input. - Use a Portable audio player in which text information is input that is supported on the unit. • Communication error - Turn the ignition key off, and then set to ON again. - Verify in the display after reconnecting the Portable audio player to the connection cable. • Caused by the Software Version not being compatible with this unit. - Update the Portable audio player Software Version. • The Portable audio player is not verified. - Change another Portable audio player. 38-EN