Alpine INE-W960HDMI Owner s Manual english - Page 14

Getting Started Accessory List • INE-W960/INE-NAV-60/INE-W960S 1 • Power cable 1 • Flush head screw (M5×8 6 • Screw (M5×8 8 • GPS Antenna 1 • Antenna mounting plate 1 • CAMERA/AUX/PRE OUT cable 1 • USB extension cable 1 • Microphone 1 • Mounting sleeve 1 • Face plate 1 • Bracket key 2 • Owner's Manual 1set Remote Sensor Point the remote control transmitter towards the remote sensor within a range of 2 meters. Optional Remote Control Interface Box This unit is operable using the vehicle's secondary radio controls. An Alpine Remote Control Interface Box (optional) is required. For details, contact your Alpine dealer. Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor. About the button descriptions used in this Owner's Manual The buttons found on the face of the unit are expressed in bold (e.g. MUTE). The buttons found on the touch-screen display are shown in bold within brackets, [ ] (e.g. [ ]). Location of Controls (Eject) button Ejects a disc. / (UP/DOWN) button Press to adjust the volume. MUTE/C button Press to activate /deactivate the mute mode. Press and hold for at least 3 seconds to turn the power off. (Phone)/VOICE CTRL. button Recalls the Telephone Menu screen. When a voice dial compatible hands-free phone is connected, press and hold for at least 3 seconds to switch to the Voice Dial screen. / button This action varies according to the Audio/Visual source. (Track Up/Down, Fast reverse/Fast forward, etc.) / button Each time you press this button, the Navigation mode and the Audio/Visual Source mode are changed alternately. Press and hold for at least 3 seconds to activate the Quick Sound screen. For details of navigation operations, refer to "Navigation System OM" in the website at http://www.alpine-usa.com. DISC Slot RESET switch The system of this unit is reset. Turning Power On or Off Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake and footbrake, before attempting these operations. 1 Turn the ignition key to the ACC or ON position. The system turns on. • When turned on, the system displays the last mode screen that was displayed before the ignition key was turned off. For example, if the unit is in radio mode when ignition is turned off, it will remain in radio mode when ignition is turned back on. 2 Press and hold the MUTE button for at least 3 seconds to turn the power off. • The unit can be turned on by pressing any button. • The INE-W960/INE-NAV-60/INE-W960S is a precision device. Careful handling of the unit should provide you with years of troublefree operation. 14-EN