Alpine KCE-400BT Owners Manual - Page 8

Adjusting the volume when receiving a Call While calling, you can adjust the volume. The adjusted volume level is stored. Turn the Rotary encoder or the Double Action encoder to adjust the volume. • You may need to increase volume from your regular audio listening source level. However, increasing the volume excessively may result in feedback. If feedback is noticed as feedback is directly related to the volume, turn down the volume as low as acceptable to eliminate it. Positioning the microphone in a direction away from the main car speakers (e.g. clipped on sun visor) may also reduce feedback at high volume. Redial Function You can redial the person you have previously called. After finishing a call, press or within 5 seconds. The telephone is redialed. Audio Switching Operation (CD Head Unit Only) While making a call, this function allows you to initiate the transfer of the audio between the mobile phone and the speakers in the car. While calling, press and hold ENT for at least 2 seconds to switch the call sound between the speakers in car and mobile phone. • Depending on the mobile phone, this operation may not be performed. Call History Call History is recorded for the last dialed/received/missed calls. There are various ways of making calls based on the "Call History." The following steps 1 to 4 are common to the various ways of making these calls. For details, refer to each individual category for making calls. 1 Press or . The outgoing method list is displayed. 2 Turn the Rotary encoder or the Double Action encoder to select the outgoing mode. Setting items : DIALED / RECEIVED / MISSED / PHONE BOOK DIALED : Dialed history RECEIVED : Received history MISSED : Missed incoming history PHONE BOOK : Mobile phonebook • The adapter will update the information in the Call History automatically each time a mobile phone is connected or receiving/dialing a call. At this time, if you select any outgoing mode, "UPDATING" will be displayed. 3 Press ENT. The outgoing mode is activated, and each mode list is displayed. • It may take some time for the list to be displayed, and also directly after connection, the list may not be brought up to date. 4 Turn the Rotary encoder or the Double Action encoder to select a name or a telephone number from the list. 5 Press ENT. The selected telephone will be called. If one name has several numbers registered in the telephone book for CD Head Unit, press ENT after selecting the name*, then turn the Rotary encoder to choose the desired number and press ENT, the telephone will be called. Press and hold ENT for at least 2 seconds after selecting the name, the default number of the name will be called. Depending on the connected mobile phone, this function may not be performed. (Only for CD Head Unit) * If the name cannot be recognized, default number will be displayed. • If you place a call directly from the paired mobile phone, the phone number is not displayed, you cannot redial from the unit in this case. 7-EN