Alpine PSS-24WRA Install Manual - Page 11
Front of Vehicle
 |
View all Alpine PSS-24WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Jeep Wrangler PSS-24WRA V20211025 ˜ 11/15 Sub Woofer/Amp Installation (continued) 7 Remove 10mm nut and attach the negative (-) ground terminal to the factory ground stud below the center console. 8 Connect the main harness to the amplifier assembly and align it to the seat mounting holes. Front of Vehicle 9 Connect the power cable to the main harness. 10 Route the main harness along the side of the center console to the radio location. 11 Connect the T-harness and the radio with either the Tharness or the RCA adaptors. Refer to page 15 and 16 for the correct system diagram. Return all removed components to their original location.
-
1 -
2
-
3
-
4
-
5
-
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
 |
 |
Jeep Wrangler
PSS-24WRA V20211025
±
11/15
Sub Woofer/Amp Installation (continued)
7
Remove 10mm nut and attach the negative (-)
ground terminal to the factory ground stud below
the center console.
9
Connect the power cable to the main harness.
11
Connect the T-harness and the radio with either
the Tharness or the RCA adaptors. Refer to page
15 and 16 for the correct system diagram. Return
all removed components to their original location.
8
Connect the main harness to the amplifier assembly
and align it to the seat mounting holes.
Front of Vehicle
10
Route the main harness along the side of the
center console to the radio location.