Alpine PSS-24WRA Install Manual - Page 8

Jeep Wrangler PSS-24WRA V20211025 ˜ 8/15 Front speaker removal and installation (continued) 19 Looking up under the airbag assembly, remove the (2) 13mm, bolts that secure the back of the passenger side airbag. 20 Unclip and slightly release the airbag panel, just enough to expose the (3) Phillips, screws securing the passenger side dash panel. 21 Carefully unclip and pull out on the dashboard panel enough to expose the speaker pod. Remove the (3) Phillips, screws securing the pod and remove. 22 Remove the factory speakers from the speaker pods. 23 Remove the grommet and factory wiring from the speaker pods. 24 Insert the factory wire into the replacement speaker pods and pull gromment thru until it seats into the hole.