Alpine PSS-24WRA Install Manual - Page 7

speaker pod, then unplug and remove. the pod.

Get Alpine PSS-24WRA PDF manuals and user guides View all Alpine PSS-24WRA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Jeep Wrangler PSS-24WRA V20211025 ˜ 7/15 Front speaker removal and installation (continued) 13 Remove the (4) 10mm screws and the (1) 8mm screw securing the dashboard brace. The brace only needs loosened to aid in removing the speaker pod in the next step. 14 Remove the (3) Phillips screws securing the speaker pod, then unplug and remove. the pod. 15 There is an electronic module attached to the back of the pod which must be removed and reused in kit assembly. 16 Open the passenger door and remove the panel on the right end of the dash. Remove the (5), Phillips screws exposed. 17 Pry outward in the bolt cover on the right end of the grab bar and remove the (2) 10mm bolts securing it to the dash. 18 Remove the glovebox then remove the (3) Phillips screws exposed.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
Jeep Wrangler
PSS-24WRA V20211025
±
7/15
Front speaker removal and installation (continued)
13
Remove the (4) 10mm screws and the (1) 8mm
screw securing the dashboard brace. The brace
only needs loosened to aid in removing the
speaker pod in the next step.
15
There is an electronic module attached to the
back of the pod which must be removed and
reused in kit assembly.
17
Pry outward in the bolt cover on the right end
of the grab bar and remove the (2) 10mm bolts
securing it to the dash.
14
Remove the (3) Phillips screws securing the
speaker pod, then unplug and remove. the pod.
16
Open the passenger door and remove the panel
on the right end of the dash. Remove the (5),
Phillips screws exposed.
18
Remove the glovebox then remove the (3) Phillips
screws exposed.