Alpine PSS-24WRA Install Manual - Page 12
Rear Soundbar Speaker Removal & Installation
View all Alpine PSS-24WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Jeep Wrangler PSS-24WRA V20211025 12/15 Rear Soundbar Speaker Removal & Installation 1 Extract the (4) 5mm, allen head, bolts and remove factory grills. 2 Extract the (5) T20, torx, screws from the speakers and the (4) T30, torx, screws from the port and remove. 3 Remove gromment holding speaker wire in place and secure speaker wire out of the way. 4 Use supplied template and mark area of each side for soundbar cutting. 5 With a reciprocating air saw or preferred cutting device, cut along the line from step 4. Note: Be cautious when cutting not to cut thru the topside of the sound bar. 6 Fill the speaker cavities witht supplied polyfil sheets.
Jeep Wrangler
PSS-24WRA V20211025
±
12/15
1
Extract the (4) 5mm, allen head, bolts and remove
factory grills.
3
Remove gromment holding speaker wire in place
and secure speaker wire out of the way.
5
With a reciprocating air saw or preferred cutting
device, cut along the line from step 4.
Note:
Be cautious when cutting not to cut thru the
topside of the sound bar.
2
Extract the (5) T20, torx, screws from the speakers
and the (4) T30, torx, screws from the port and
remove.
4
Use supplied template and mark area of each side
for soundbar cutting.
6
Fill the speaker cavities witht supplied polyfil
sheets.
Rear Soundbar Speaker Removal & Installation