Alpine UTE-52BT Owners Manual (english) - Page 22

5 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • Press t to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. General Setting GENERAL is selected on the setup main menu in step 2. Setting the AUX SETUP mode You can input the audio of an external device, (such as a Portable audio player) to the AUX connector of this unit.  Setting item: AUX SETUP Setting contents: AUX OFF / AUX ON (Initial setting) AUX OFF: When set to OFF, AUX source cannot be selected. AUX ON: Set to ON when a portable device is connected. If VSOURCE is pressed and AUX is selected, the sound of the portable device is input to the unit. Setting the AUX NAME mode You can change the AUX NAME display in the SETUP mode.  Setting item: AUX NAME Setting contents: AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME Note • PORTABLE is abbreviated as PMD in the display. Turning Mute Mode On/Off (INT MUTE) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. Make sure the Audio Interrupt In Lead (Pink/Black) is connected to the terminal where the voltage becomes 0 V (GND) when a sound from External Unit is input into AUX. Otherwise, this function may not operate. For details, refer to "Connections" on page 49.  Setting item: INT MUTE Setting contents: OFF AUX (Initial setting) / ON OFF AUX: When the interrupt signal is received from device, the AUX source volume will be output from the unit. ON: When the interrupt signal is received from device, no sound will be output. Playing MP3/WMA Data (PLAY MODE) (CDE-153BT only) This unit can play back CDs containing both CD and MP3/WMA data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can choose to play back the CD data session only. When a disc contains both CD and MP3/WMA data, playback starts from the CD data portion of the disc.  Setting item: PLAY MODE Setting contents: CD-DA / CDDA/MP3 (Initial setting) CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA files in mixed mode, and multi-session discs can be played back. Note • Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. Setting the stay on mode You can set the delay in turning OFF the unit's power after the vehicle's ignition is turned off (ACC OFF). When you select a mode other than OFF, the music will be paused after you turn the ignition key off (ACC OFF). At the same time, the prompt "PRESS PRESET 6 TO STAY ON" will scroll once. Press 6 within 15 seconds to continue enjoying music for the selected period. If 6 is not pressed, the unit will power off within 15 seconds. During this period, you can only receive a call by operating a paired Smartphone.  Setting item: STAY ON Setting contents: OFF (Initial setting) / 5 MIN/ 15 MIN / 30 MIN Note • Note that there is a possibility that the battery may be drained if already weak, during this period. Demonstration This unit has a demonstration feature for the display.  Setting item: DEMO MODE Setting contents: ON (Initial setting) / OFF / QUITE OFF ON: The unit starts the demonstration if there is no operation for 30 seconds. OFF: Quit the demonstration mode. Note that if this unit is disconnected from the vehicle's battery, the next time you use this unit the DEMO mode will be ON. QUITE OFF: Quit the demonstration mode completely. Display Setting DISPLAY is selected on the setup main menu in step 2. Dimmer Control Set the Dimmer control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.  Setting item: DIMMER Setting contents: DIM MANUAL / DIM AUTO (Initial setting) 22-EN