Alpine UTE-52BT Owners Manual (english) - Page 24

BT Hands Free Calling /SOURCE Rotary encoder /ENTER AUDIO/SETUP  /VOICE CTRL. BAND ABC SEARCH / II  1 2 Preset buttons (1 through 6) Setup Before Using About BLUETOOTH BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the BLUETOOTH Home page (http://www.bluetooth.com). Notes • Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit. • Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website. • Depending on the surroundings, BLUETOOTH wireless connection may be unstable. • When you place a call, or perform setup operations, be sure to stop your car in a safe place. • Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner's Manual of the connected device(s). • When you search for this unit using the BLUETOOTH compatible phone, the unit name is displayed as "CDE-153Series" / "UTE-52Series". Before Using BLUETOOTH Function Before using the BLUETOOTH function, the following settings need to be made. Set BT IN to ON when you want to use Hands-Free phone or BT Audio function. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 25. Note • Before using BLUETOOTH function, it must be paired with this unit. Refer to "How to connect to a BLUETOOTH compatible device (Pairing)" on page 24. How to connect to a BLUETOOTH compatible device (Pairing) For details on the control from a BLUETOOTH compatible device, refer to the Owner's Manual of the BLUETOOTH compatible device. 1 Using your BLUETOOTH compatible device, select the "CDE-153Series" / "UTE-52Series" for pairing. For BLUETOOTH compatible device with SSP (Secure Simple Pairing) 2-1 Turn the Rotary encoder to change the head unit display from "PAIR NO" to "PAIR YES", and then press ENTER. If "PAIR NO" is selected, the connection will be canceled. For BLUETOOTH compatible device without SSP (Secure Simple Pairing) 2-2 Input the PIN code ("0000") in a BLUETOOTH compatible device. Note • The PIN code is fixed as "0000". 3 If the pairing was successful, "CONNECTED" is displayed for a few seconds. The head unit then returns to its previous state. Auto pairing with an iPod/iPhone When an iPod/iPhone is connected to the USB port, the unit will automatically pair with it. 1 Make sure USB PAIR is set to ON. (Refer to "Setting the Auto Pairing with iPod/iPhone" on page 25) 2 Connect an iPod/iPhone to this unit's USB port. 3 Turn the Rotary encoder to select "PAIR YES", and then press ENTER.* If "PAIR NO" is selected, the connection will be canceled. * Depending on the iOS version, you may need to turn on the Bluetooth function manually on the iPod/iPhone side, then perform this step. 4 If pairing is successful, "CONNECTED" is displayed for a few seconds. The head unit then returns to its previous state. Notes • If the device has been paired with this unit previously, it will not USB Pair automatically. • If the connection is unsuccessful, "FAILED" is displayed. • After a successful pairing, the two devices should connect automatically whenever the vehicle's ignition is turned ON. If the auto reconnect fails, try to connection manually. • Set "VISIBLE M" to VISI M ON to enable this unit to be recognized by a BLUETOOTH compatible device, refer to "Setting the Visible Mode" on page 25. 24-EN