Alpine UTE-52BT Owners Manual (english) - Page 38
Storing the desired Artist and Song Alerts
View all Alpine UTE-52BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Checking the SiriusXM Radio ID Number Tune Scan Function To subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID contains 8 characters and can be found on the bottom of your SiriusXM Tuner or can be displayed on when selecting Channel 0 by following the steps below: 1 While in the Satellite Radio Mode, press or to select channel "0". The unit displays "RADIO ID" and ID number alternately. Note • The Radio ID does not include the letters I, O, S or F. 2 To cancel the ID number display, select a channel other than "0". Storing Channel Presets 1 Press BAND to select the desired band you want to store the preset in. There are 3 Satellite Radio Preset bands. Each press of BAND changes the band: SXM1 SXM2 SXM3 SXM1 2 Tune to the desired channel, and then press and hold (for at least 2 seconds) one of the preset buttons (1 through 6) to store the channel. The display then shows the stored Band and preset number (for example, SXM1-3 is shown when preset 3 of BAND1 is selected). 3 Repeat the procedure to store up to 5 other channels onto the same band. Notes • A total of 18 channels can be stored in the preset memory, 6 Channels for each band (SXM1, SXM2 and SXM3). • If you store a new channel into a preset which already has a channel assigned, the current channel will be cleared and replaced with the new one. Tuning Channels using Presets 1 Press BAND to select the desired band of Presets you wish to access. 2 Press the preset buttons (1 through 6) that has your desired Satellite Radio channel stored in memory. Tune Start Function Use TUNE START to play music content from its beginning on programmed preset stations. The user can, therefore, enjoy the full track (i.e. song) rather than hearing what's left from its current live playback position. TUNE START can be turned OFF. For details, refer to "Setting Tune Start" on page 37. Note • Preset stations that play other than music-type content will start playing the channel from the current live play point when selected. While listening to SiriusXM Satellite Radio, you can scan through all the songs you missed from your current band of preset channels. 1 Press and hold /ENTER/OPTION for at least 2 seconds when you want to scan the preset music. The Option mode is activated. 2 Turn the Rotary encoder to select TUNE SCAN, and then press /ENTER. The " " indicator lights up during TUNE SCAN mode. Press /ENTER during scan playback, tune scan mode will be canceled and the selected track will be played back normally, at the same time the " " indicator disappears. Press r during scan playback to cancel Tune Scan mode. The tuner returns to the channel before Tune Scan was initiated and "SCAN STOP" will be displayed. Notes • This function is available when SiriusXM SXV200 Vehicle Tuner is connected. • If no operation is performed during the scanning process, when scanning finishes, the next mode depends on the SiriusXM Tuner. • During Tune Scan mode, the artist and song name will be displayed. • The SiriusXM Tune scans through the songs from the preset music channels on the current band only, scanning from oldest to newest. Storing the desired Artist and Song Alerts While listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. An interruption ALERT will be displayed when a matching artist or song is found on another channel. For receiving interruption ALERT information, refer to "Receiving and Tuning to an Alert" on page 39. 1 Press and hold ENTER/OPTION for at least 2 seconds when a Song or the song of an Artist you want to store is playing. The Option mode is activated. 2 Turn the Rotary encoder to select ALERT MEMO, and then press ENTER. 3 Turn the Rotary encoder to choose SAVE ART? or SAVE SNG? (when available), and then press ENTER. Note • If the artist name or song title is not available to save, NO ARTIST or NO SONG will be displayed. 4 The new alert was stored in memory. An "ART/SONG SAVED" pop-up screen is followed by an "XX U(sed)/YY E(mpty)". XX is the total number of song titles or artist names stored in memory, and YY is the total number of memory locations still available for storage. Notes • If you try to store when the memory is full, "MEM FULL" is displayed followed by "REPLACE/CANCEL". If you want to replace an existing alert item, select "REPLACE" by turning Rotary encoder, and then press ENTER, the existing alert list stored in memory is displayed. Select one of the stored alerts using the Rotary encoder. To replace the selected alert, press ENTER and "ART/SONG SAVED" and "X U(sed)/ Y E(mpty)" are displayed. 38-EN