Alpine UTE-52BT Owners Manual (english) - Page 9

Getting Started AUDIO/SETUP Rotary encoder /ENTER e / /SOURCE Accessory List • Head Unit 1 • Power Cable 1 • Microphone 1 • Mounting Sleeve 1 • Carrying Case 1 • Bracket Key 2 • Screw (M5 × 8 4 • Owner's Manual 1 set Source Selection Press VSOURCE to change the source. TUNER  SIRIUSXM*1  DISC*2  USB AUDIO*3/iPod*4  BT AUDIO*5  PANDORA*6  AUXILIARY*7  TUNER *1 Displayed only when a SiriusXM Tuner is connected. *2 CDE-153BT only. *3 Displayed only when no iPod/iPhone is connected. *4 Displayed only when the iPod/iPhone is connected. *5 Displayed only when BT IN is set to ON, refer to "Setting the BLUETOOTH Connection (BT IN)" on page 25. *6 Not displayed when ALPINE APP is set to OFF, refer to "Setting the communication mode with a Smartphone (ALPINE APP)" on page 23. *7 Refer to "Using the Front AUX Input Terminal" on page 19. Detaching and Attaching the Front Panel Detaching Turning Power On and Off Press t to turn on the unit. Note • The unit can be turned on by pressing any other button except  and e (Release). Press and hold t for at least 2 seconds to turn off the unit. Note • The first time power is turned on, the volume will start from level 12. Notes • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. Attaching Demonstration Function This unit has a demonstration feature for display. When Demo mode is set to ON (initial setting), the unit starts the demonstration if there is no operation for 30 seconds. When installing this unit in a car for the first time, the DEMO OFF screen will be displayed for 30 seconds after turning on the unit. Press ENTER within 30 seconds to turn off the Demonstration mode*. Otherwise, the Demo mode remains ON and the unit starts the demonstration if there is no operation for 30 seconds. * The operation is the same as setting DEMO MODE to OFF in the Setup menu. However, if the unit is disconnected from the vehicle's battery, DEMO MODE will be switched to ON automatically when the unit is used next time. If you want to completely close the Demo mode, set DEMO MODE to QUITE OFF. For details, please refer to "Demonstration" on page 22. Notes • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. 9-EN