Alpine VPX-B104R Owners Manual - Page 12
Ltcaution
View all Alpine VPX-B104R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Sensor Assembly 1 Remove the cap from the sensor unit after the paint is dry. 2 Install the sensor rubber into the sensor unit. LtcAUTION The side of the sensor rubber with the 12 noticeable points must face the SENSOR UNIT. LtcAUTION • Do not damage the coating surface when installing the rubber ring and sensor cap. • Confirm the installation is not loose when installing the rubber ring and sensor cap. • Make sure the rubber ring is not deformed when the sensor cap is installed into the sensor unit. • Use Superglue where the sensor cap and sensor unit join, to increase security (Use the superglue for plastic only) 1 Bumps 3 Install the sensor cap onto the sensor unit. 4 Install the spring plate into the sensor unit. 11-EN
Sensor Assembly
1
Remove
the
cap from
the
sensor
unit
after
the
paint
is
dry.
2
Install
the
sensor
rubber
into
the
sensor unit.
LtcAUTION
The side
of
the
sensor
rubber
with
the
12
noticeable points must face
the
SENSOR
UNIT.
1
Bumps
3
Install
the
sensor
cap
onto
the
sensor
unit.
LtcAUTION
• Do
not
damage
the
coating surface when
installing
the
rubber
ring and sensor cap.
• Confirm
the
installation
is
not
loose when
installing
the
rubber
ring and sensor cap.
• Make sure
the
rubber
ring is
not
deformed
when
the
sensor cap
is
installed
into
the
sensor unit.
•
Use
Superglue where
the
sensor cap and
sensor
unit
join,
to
increase security
(Use
the
superglue
for
plastic only)
4
Install
the
spring
plate
into
the
sensor
unit.
11-EN