Alpine VPX-B104R Owners Manual - Page 4
Caution - vpass
View all Alpine VPX-B104R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. WHEN USING A DRILL TO MAKE A HOLE, TAKE PRECAUTIONS SUCH AS WEARING GOGGLES SO FRAGMENTS DO NOT GET INTO THE EYES. Failure to do so may result in injury. CALIBRATION REQUIRED. Calibration may be required for adjusting parking guideline. BE CAREFUL WHEN SETTING THE ALARM VOLUME. Set the alarm volume to an audible level. If the alarm cannot be heard due to the volume of the car radio, etc., it might result in an accident. 6CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. DO NOT ATTACH THE CAMERA AND/OR SENSOR MOUNTING TO FLUOROCARBON RESIN FINISHED CAR BODIES OR GLASS. Doing so could cause the strength of the mounting to weaken, which could cause it to fall of and cause accidents, injury, or damage to the car body. DO NOT ATTACH THE CAMERA AND/OR SENSOR MOUNTING TO ANY SURFACE WHERE THE ENTIRE ADHESIVE SURFACE CANNOT BE APPLIED. Doing so could cause the strength of the mounting to weaken, which could cause it to fall of and cause accidents, injury, or damage to the car body. EXCEPT FOR THE CAMERA AND/OR SENSOR, DO NOT ATTACH ANY PARTS TO AREAS WHICH WILL GET WET, OR WHERE THERE IS A LOT OF HUMIDITY OR DUST. Failure to do so may result in fire or damage. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This rnay cause parts to become loose resulting in hazards or product failure. HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. ARRANGE THE WIRING SO IT IS NOT CRIMPED.OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. CHECK WIRING WHEN ATTACHING. Double-check your wiring to ensure all connections are correct and secure. Also, do not apply unnecessary force to the harness. This can result in battery failure, performance failure, connector damage, or wire breakage. This system uses ultrasonic sensors to help sharpen the driver's detection of obstacles. It is used when parking in a garage or a narrow passage. As such, this system does not relieve the driver of the obligation to pay attention to his/ her driving, and the driver should exercis~ safe driving habits without relying heavily on this system. The detection range of the Visual Parking Assist Sensor System (VPASS system) is restricted to the area around the bumper. When moving the car either forward or backward, drive slowly and keep a safe distance around the vehicle. To ensure the sensors function accurately, never install accessories in close proximity to the sensors. 1 The detecting function might not operate properly under the following conditions: • When the detection sensors become frozen. (Normal function resumes after defrosting.) 3-EN