Amana NTW4800XQ Installation Instruction - Page 2

Installation Requirements, Location Requirements - washer

Page 2 highlights

INSTALLATION REQUIREMENTS TOOLS AND PARTS Gather required tools and parts before starting installation. Tools needed: Parts needed: (Not supplied with washer) Adjustable or open end Level wrench 9/16" (14 mm) 4" min (102 mm) Wood block Ruler or measuring tape Pliers that open to 19⁄16" (39.5 mm) Optional tools: Flashlight Bucket Parts supplied: NOTE: All parts supplied for installation are in washer basket. Removable tie strap Front leveling feet with jam nuts (2) Drain hose form Inlet hoses with flat washers To order, please refer to the phone number or website on back page of your "Use and Care Guide". ■■ 8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack) ■■ 8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack) ■■ 8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack) ■■ 8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM (2 pack) ■■ 8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack) ■■ 8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space saving 90° elbow, hypro-blue steel couplings (2 pack) ■■ 8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving 90° elbow, hypro-blue steel couplings (2 pack) Alternate parts: (Not supplied with washer) Your installation may require additional parts. To order, please refer to the phone number or website on the back page of your "Use and Care Guide". If you have: You will need: Overhead sewer Standard 20 gal. (76 L) 39" (991 mm) tall drain tub or utility sink, sump pump, and connectors (available from local suppliers) Short drain hose Drain Extension Kit Part Number 49022 1" (25 mm) diameter standpipe 2" (51 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Kit, Part Number 40923 Connector Kit, Part Number 285835 Lint clogged drain Drain protector, Part Number 376031 Floor drain Siphon Break Kit, Part Number 280129A Drain Hose, Part Number 285702 Connector Kit, Part Number 285835 LOCATION REQUIREMENTS Select proper location for your washer to improve performance and minimize noise and possible "washer walk". Install your washer in a basement, laundry room, closet, or recessed area. 42" (1067 mm) 27" (686 mm) 251/2" (648 mm) 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

2
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Tools needed:
Adjustable or open end
wrench
9
/
16
" (14 mm)
Level
Wood block
Ruler or measuring tape
Pliers that open to 1
9
16
"
(39.5 mm)
Optional tools:
Flashlight
Bucket
Parts supplied:
NOTE:
All parts supplied for installation are in
washer basket.
Removable tie strap
Front leveling feet with
jam nuts (2)
Drain hose form
Parts needed:
(Not supplied with washer)
To order, please refer to the phone number or website on back page
of your “Use and Care Guide”.
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
“Use and Care Guide”.
If you have:
You will need:
Overhead sewer
Standard 20 gal. (76 L) 39"
(991 mm) tall drain tub or utility
sink, sump pump, and connectors
(available from local suppliers)
Short drain hose
Drain Extension Kit Part Number 49022
1" (25 mm)
2" (51 mm) diameter to 1" (25 mm) diameter
diameter standpipe
Standpipe Adapter Kit, Part Number 40923
Connector Kit, Part Number 285835
Lint clogged drain
Drain protector, Part Number 376031
Floor drain
Siphon Break Kit, Part Number 280129A
Drain Hose, Part Number 285702
Connector Kit, Part Number 285835
Inlet hoses with flat washers
LOCATION REQUIREMENTS
Select proper location for your
washer to improve performance
and minimize noise and possible
“washer walk”. Install your
washer in a basement, laundry
room, closet, or recessed area.
27"
(686 mm)
42"
(1067 mm)
25
1
/
2
"
(648 mm)
4" min
(102 mm)
Gather required tools and parts before starting installation.
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
8212545RP
5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
(2 pack)
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space saving
90° elbow, hypro-blue steel couplings (2 pack)
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving
90° elbow, hypro-blue steel couplings (2 pack)