Arlo Security Light User Manual - Page 9
Test motion detection, Find out if your light is close enough to your bridge, Motion Detection Test
View all Arlo Security Light manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Set up your system Test motion detection You can use the motion detection test to find the right motion sensitivity setting for each light. ¾¾ To run a motion detection test: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays. 2. Tap the gear icon for the light. The Device Settings page displays for the selected light. 3. Tap or click Motion Detection Test. 4. Move in front of the light. During the motion detection test, the light blinks yellow when motion is detected. 5. Move the slider to adjust the motion sensitivity level as needed. 6. Edit the rule for your light to enter the motion sensitivity level that you want to use. See Change motion sensitivity on page 20. Find out if your light is close enough to your bridge You can use the range finder test to verify when a light is within range of your Arlo Bridge. ¾¾ To run a range finder test: 1. Tap the Arlo icon on your mobile device. If you are using a computer, enter https://my.arlo.com/#/login in the address bar of a browser. The Devices page displays. 2. Tap the gear icon for the light. The Device Settings page displays for the selected light. 9