Asus A7V266 Motherboard DIY Troubleshooting Guide - Page 34

Floppy Disk Drive Connector 34-1 pin FLOPPY

Get Asus A7V266 PDF manuals and user guides View all Asus A7V266 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

01 01 01 01 01 01 3. HARDWARE SETUP 8) IDE Activity LED (2-pin IDELED) This connector supplies power to the cabinet's IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors cause the IDE LED to light up. A7V266 A7V266 IDE Activity LED IDELED TIP: If the case-mounted LED does not light, try reversing the 2-pin plug. 3. H/W SETUP Connectors 9) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). NOTE: Orient the red markings on the floppy ribbon cable to PIN 1 A7V266 PIN 1 A7V266 Floppy Disk Drive Connector 34 ASUS A7V266 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
34
ASUS A7V266 User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
8)
IDE Activity LED (2-pin IDELED)
This connector supplies power to the cabinet’s IDE activity LED.
Read and
write activity by devices connected to the Primary or Secondary IDE connectors
cause the IDE LED to light up.
9)
Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives.
(Pin 5 is removed to prevent inserting in the wrong orientation when
using ribbon cables with pin 5 plugged).
A7V266
0
1
0
1
0
1
A7V266 IDE Activity LED
TIP:
If the case-mounted LED does not
light, try reversing the 2-pin plug.
IDELED
NOTE:
Orient the red markings on
the floppy ribbon cable to
PIN 1
A7V266 Floppy Disk Drive Connector
PIN 1
A7V266
0
1
0
1
0
1