Asus A88XM-PLUS User Guide - Page 23
A88XM-PLUS Chassis intrusion connector, Chassis intrusion connector 4-1 pin CHASSIS
View all Asus A88XM-PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default, the pins labeled "Intruder" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. CHASSIS A88XM-PLUS PIN 1 A88XM-PLUS Chassis intrusion connector +5VSB_MB Chassis Signal GND ASUS A88XM-PLUS 1-13
ASUS A88XM-PLUS
1-13
2.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pins labeled “Intruder” are shorted with a jumper cap. Remove
the jumper caps only when you intend to use the chassis intrusion detection
feature.
A88XM-PLUS
A88XM-PLUS Chassis intrusion connector
PIN 1
+5VSB_MB
Chassis Signal
GND
CHASSIS